Part Number: DRV8143H-Q1EVM
Hi~
When the DRV8143H-Q1EVM is connected to power, the D2 LED continues to blink.
The jumper settings are as shown below.
When the nFault jumper (J4, 9-10) is opened, the D2 LED turns off.
I understand that nFault operates in Active Low when there is a problem with the DRV8143H-Q1.
Even though the power supply and load connection are performed properly, the D2 LED blinks.
What settings are causing the D2 LED to keep blinking?
