Part Number: MCT8316Z
In the MCT8316Z manual , it mantions that in Synchronous PWM mode (Table 8,4) the PWM and PWMn is provides to a specific Phase.
however there is a Dead time between the switching of the Phase.
that can reach even 3400nsec, at it occurs twice in each cycle.
Assuming I work with 50Khz PWM mode..
50Khz*3.4uSeC*2=340msec.
this means there is no power in 34% of the time..
the device can reach 200,000Khz, so the device will be in dead time continually.
is this true ?
