Part Number: MCT8316Z
Other Parts Discussed in Thread: TEST
Other Parts Discussed in Thread: TEST
Hi,
The customer constructed a schematic diagram referring to Figure 9-1.
However, the motor is not working.
Please review the schematic.
e2e.ti.com/.../MCT8316_5F00_schematic.pdf
FGOUT is MCU and Disconnection status.
Do not use MCT8316ZT built-in BUCK.
Operation test according to the presence or absence of built-in LDO AVDD: It does not work.
The Hall Sensor voltage is applied with an external 5 volt voltage.
DR & BRAKE PORT uses MCU GPIO Port and does not use PWM Control Mode.
