2x DRV8301 for 3x brused motors (FB)

I will design a custom board with two DRV8301 driving three brused motors via N-Mosfet full bridge.
Each Motor have one shunt for current sensing to GND.

GateDriverUnit 1 -
                                | - > Motor 1
GateDriverUnit 2 -

GateDriverUnit 3 -
                                | - > Motor 2
GateDriverUnit 1 -

GateDriverUnit 2 -
                                | - > Motor 3
GateDriverUnit 3 -

Is this setup possible?

Andreas