MCT8316A: Reduce startup inrush current

Tool/software:

Hello,

What are some ways I can reduce the startup current on the MCT8316A? I am using a battery to power my BLDC driver module and it occasionally trips due to its internal current limit. 

Here is my current JSON file:

{"signature": "oneui-register-data","data": [
    [
      {"idx": 0,"id": "isd_config","value": "0x6F04C100"
      },
      {"idx": 1,"id": "motor_startup1","value": "0x38C561F7"
      },
      {"idx": 2,"id": "motor_startup2","value": "0x1BB999A4"
      },
      {"idx": 3,"id": "closed_loop1","value": "0x0746B314"
      },
      {"idx": 4,"id": "closed_loop2","value": "0x02A664D0"
      },
      {"idx": 5,"id": "closed_loop3","value": "0x4CC40101"
      },
      {"idx": 6,"id": "closed_loop4","value": "0x000CE944"
      },
      {"idx": 7,"id": "const_speed","value": "0x00A00504"
      },
      {"idx": 8,"id": "const_pwr","value": "0x177048C2"
      },
      {"idx": 9,"id": "150_deg_two_ph_profile","value": "0x36DB6DA6"
      },
      {"idx": 10,"id": "150_deg_three_ph_profile","value": "0x36DB6D80"
      },
      {"idx": 11,"id": "trap_config1","value": "0x054BA106"
      },
      {"idx": 12,"id": "trap_config2","value": "0x2A880000"
      }
    ],
    [
      {"idx": 0,"id": "fault_config1","value": "0x78F43025"
      },
      {"idx": 1,"id": "fault_config2","value": "0x74473809"
      }
    ],
    [
      {"idx": 0,"id": "gd_config1","value": "0x18440008"
      },
      {"idx": 1,"id": "gd_config2","value": "0x14000000"
      }
    ],
    [
      {"idx": 0,"id": "pin_config1","value": "0x2D720602"
      },
      {"idx": 1,"id": "pin_config2","value": "0x080C0000"
      },
      {"idx": 2,"id": "device_config","value": "0x7FFF0000"
      },
      {"idx": 3,"id": "peri_config","value": "0x00000000"
      }
    ],
    [
      {"idx": 0,"id": "ana_trim3","value": "0x48004800"
      },
      {"idx": 1,"id": "ana_trim4","value": "0x00000000"
      },
      {"idx": 2,"id": "ana_trim5","value": "0x00000031"
      },
      {"idx": 3,"id": "ana_trim6","value": "0x00000000"
      },
      {"idx": 4,"id": "ana_trim7","value": "0x00000000"
      },
      {"idx": 5,"id": "ana_trim8","value": "0x00006701"
      },
      {"idx": 6,"id": "ana_trim9","value": "0x0065E7E2"
      },
      {"idx": 7,"id": "ana_trim10","value": "0x536C123B"
      }
    ],
    [
      {"idx": 0,"id": "algo_reserved1","value": "0x00000000"
      },
      {"idx": 1,"id": "algo_reserved2","value": "0x00000000"
      },
      {"idx": 2,"id": "algo_reserved3","value": "0x00000000"
      }
    ],
    [
      {"idx": 0,"id": "gate_driver_fault_status","value": "0x00000000"
      },
      {"idx": 1,"id": "controller_fault_status","value": "0x00000000"
      }
    ],
    [
      {"idx": 0,"id": "sys_status1","value": "0x00DD0000"
      },
      {"idx": 1,"id": "sys_status2","value": "0x60010000"
      },
      {"idx": 2,"id": "sys_status3","value": "0x00000000"
      }
    ],
    [
      {"idx": 0,"id": "device_ctrl","value": "0x00008000"
      }
    ],
    [
      {"idx": 0,"id": "algo_ctrl1","value": "0x00000000"
      }
    ]
  ]
}

Thanks!